Battery Seald Lead Acid (VRLA) 12v 200 Ah SABA BATTERY
The 12-volt 200 Ah of SABA battery is a seald lead acid battery manufactured in China. It has dimensions of 522 mm in length, 240 mm in width and 218 mm in height. The weight of this battery is 59.8 kilograms.
Basically, this type of battery can not add water, acid, or other ingredients to ingredients over the course of the application.
The components of a sila acid lead acid are summarized as follows:
-
Battery box made of plastic and mainly ABS type, has high resistance to heat from the environment and battery interactions and possible blows, as well as complete insulation of the electric current.
-
The plate or plate, which is mainly lattice, is a positive electrode of lead-calcium alloy with porous lead oxide as the active material and the negative electrode is a lead-based lead-copper alloy of calcium lead, and in standard state, the negative plates are thinner than The electrode is positive.
-
Battery separators are used to prevent the connection between positive and negative electrons, and in silicate acid batteries, they use a kind of solid fiberglass, which is usually able to absorb electrolyte, as well as the reactive oxygen release ability.
-
The header or battery terminal located in the positive and negative posture of all positive and negative all electrons, usually red and black, or the + and + sign, are characterized by a positive red color and a black color The pole is negative. Usually, in the lower-voltage amps, the terminals are fissionable, and in high-power batteries, thicker sheets are connected with the bolts and nuts.
-
The battery valve or valve is used to drain waste gases that are usually caused by high charge or discharge. If these valves do not work well, the accumulation of gases will increase the internal gas pressure, which is very dangerous and can lead to an explosion in the battery.
As noted, Seald Lead Acid batteries are vacuum and do not require the addition of water and acid, because the gases and released oxygen from the electron-positive after being transferred to the electron-negative by combining chemicals and into water, and the resulting water This reaction, along with battery acid, returns to the cycle.
